A couple of months ago, the stocks of our Xscape banner display system were depleted. Sadly, we weren’t able to order a new shipment in time, and we weren’t sure when we’d be getting more in, so we decided it was best to mark them as ‘out of stock’ on our website and make them unavailable to order. Two months on, that was clearly the right decision. I expect we’d have had a few disgruntled customers waiting for their banners stands if we hadn’t.
Now though, we’re glad to say that the Xscape is back in stock…
…with one small change: the size has been reduced slightly. The width is 50mm less, now at 800mm. The height is 200mm less, now at 1800mm.
We’re still in the process of getting the original Xscape back in stock, and we hope it won’t be much longer before these are available. Once we have them again, it is likely we will revert back to the original size.
Please bear the size difference in mind if you are ordering replacement graphics. Obviously, the smaller stand won’t fit the larger graphics, and vice versa. If you’re after a replacement graphic for the original stand, please order a bespoke banner at 850mm × 2000mm on our standard 440gsm PVC and mention in the order notes that you will be using it with the Xscape.
Why the Xscape?
We’re big fans of ‘spider stands’. Although roller banners are very good at what they do, they’re a bit more of a hassle to get the graphics replaced. Spider stands, like the Xscape, come folded up and can be easily assembled in a matter of seconds. Fitting or replacing the graphic is simply a case of removing a screw cap in each corner, swapping out the old graphic for the new one, then replacing the caps. The whole process can be done in about two minutes. Add to that the fact that the Xscape is also £20 less than our starter roller banner, and you’ve got yourself a winner.