Banners with Pole Pockets

Pole pockets on banners are something that can cause a bit of confusion. This is compounded by the fact that some companies do things differently when producing banners with pole pockets.

Macy's Lamp Post Banners

Macy’s lamp post banners with wind-slits

What is a Pole Pocket?

A pole pocket is, as you would imagine, a pocket to slide a pole through. These can be on any side of the banner but is most commonly on the top and bottom so that it can be suspended between two horizontal poles.

A typical use for banners with pole pockets would be for lamp post banners or banners used on scaffolding.

Ordering Banners with Pole Pockets

The most common problem with pole pockets arises when ordering. Some people think that the pole pocket is going to be ‘added on’ to the size of the banner. However, this is not the case as the pole pockets needs to be included with the finished size of the banner – this makes things easier from the customer’s point of view if a banner is to bridge two poles.

Banner with pole pockets measurements

Measurements on a banner with pole pockets

As you can see by this example the final size of the banner includes the pole pockets. The pole pockets are inclusive of the banner’s size and not an addition to.

One thing that you have to bear in mind is that there may be minor fluctuations in the dimensions of the banner. This is due to the pole pocket being able to ‘squash’ its shape from circle to oval and even flat – this isn’t usually a problem on 99% of banners but if you think this may cause an issue please do speak to us.

Pole pocket diameter

The diameter of a pole

 

 

The size of a Pole Pocket

We will calculate the size of a pole pocket, required for each banner, all we require from you when ordering is the diameter of the pole going into the pocket. From this measurement we can then calculate the size of the pole pocket required.

How a pole pocket should look

How a pole pocket should look

The pole pocket should always have a bit of ‘wiggle’ (the very technical term we like to use), so that the pole can move freely within the pocket. This not only allows for easy fitting, but more importantly it distributes the stresses of the banner more evenly across the pocket and does not focus them on the join, increasing the life span of your banner.

How Pole Pockets Affect Artwork

Because of the un-flat nature of pole pockets it is best not to include any important information on the artwork where a pole pocket will be. Flat colour and imagery are fine, but you should steer clear of using any logos or text that you want readable in this area.

Another element to take into conisderation is the ‘weld line’. This is the transparent line that welds the banner to itself to produce the pocket. Although the weld line is transparent it does have a different appearance to the rest of the banner and if text crosses into this area it can hinder legibility.

The width of the weld line is typically 30mm in thickness.

Below are some example pole pocket sizes (based on the diameter of the pole) and how much clearance you need to give the text on your artwork. Please remember that plain colour and background imagery are fine within the clearance area.

Artwork clearance for pole pockets

Artwork clearance for pole pockets

These values work no matter which edge of the banner the pole pocket is situated.

The Summary

When ordering banners with pole pockets remember the following:

  • Provide us with the diameter of the pole going into the pocket
  • Give your artwork enough clearance
  • This applies whether it is a single or double-sided banner

This is only meant as a guide to help you when ordering banners with pole pockets and we are always at the end of a phone should you have any issues, on 0845 604 1030.

About Wayne

The lead designer/developer, I have been designing and building websites since 1997. The ability to build database driven websites whilst still keeping the design as the main focus has proven invaluable in getting Venture Banners to it's current, heady status.
This entry was posted in Artworks & Design, Banners & Products, Printing and tagged , , , , . Bookmark the permalink.

Comments are closed.